dmesg - 2011-10-12 10:15
Linux version 2.6.39-liquorix-20111012 (root@msi) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 ZEN SMP PREEMPT Wed Oct 12 11:01:05 EEST 2011
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.4 present.
DMI: MICRO-STAR INTERNATIONAL CO., LTD MS-7235/MS-7235, BIOS 1.10 06/13/2008
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fee0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CCFFF write-protect
CD000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1023MB, range: 1MB, type UC
total RAM covered: 1023M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1023MB, range: 1MB, type UC
found SMP MP-table at [c00f5240] f5240
initial memory mapped : 0 - 01c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
RAMDISK: 2f508000 - 2ff68000
ACPI: RSDP 000f9210 00014 (v00 IntelR)
ACPI: RSDT 3fee3040 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3fee30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3fee3180 04BB6 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3fee0000 00040
ACPI: HPET 3fee7e80 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 3fee7f00 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 3fee7d80 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 3fee7f80 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
ACPI: SSDT 3fee8410 002F1 (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
134MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003fee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fee0
On node 0 totalpages: 261743
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 270 pages used for memmap
HighMem zone: 34260 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @f6800000 s26432 r0 d22720 u1048576
pcpu-alloc: s26432 r0 d22720 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003fee0)
Memory: 1020836k/1047424k available (3452k kernel code, 26136k reserved, 1759k data, 548k init, 138120k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1517000 - 0xc15a0000 ( 548 kB)
.data : 0xc135f0ce - 0xc1516d80 (1759 kB)
.text : 0xc1000000 - 0xc135f0ce (3452 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:744 16
CPU 0 irqstacks, hard=f6408000 soft=f640a000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2004.600 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4009.20 BogoMIPS (lpj=2004600)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Disabled at boot.
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20110316
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f648a000 soft=f648c000
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 9b000
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (8018.20 BogoMIPS).
devtmpfs: initialized
PM: Registering ACPI NVS region at 3fee0000 (12288 bytes)
print_constraints: dummy:
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Detected MSI hardware, enabling workarounds.
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 3fee8380 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20060912)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20060912)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x3ff00000-0xfebfffff]
pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
pci 0000:00:1d.0: reg 20: [io 0xfd00-0xfd1f]
pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
pci 0000:00:1d.1: reg 20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
pci 0000:00:1d.2: reg 20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
pci 0000:00:1f.2: reg 10: [io 0xfa00-0xfa07]
pci 0000:00:1f.2: reg 14: [io 0xf900-0xf903]
pci 0000:00:1f.2: reg 18: [io 0xf800-0xf807]
pci 0000:00:1f.2: reg 1c: [io 0xf700-0xf703]
pci 0000:00:1f.2: reg 20: [io 0xf600-0xf60f]
pci 0000:00:1f.2: reg 24: [io 0xf500-0xf50f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
pci 0000:00:1f.3: reg 10: [mem 0xfdffd000-0xfdffd0ff]
pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
pci 0000:00:1f.5: reg 10: [io 0xf300-0xf307]
pci 0000:00:1f.5: reg 14: [io 0xf200-0xf203]
pci 0000:00:1f.5: reg 18: [io 0xf100-0xf107]
pci 0000:00:1f.5: reg 1c: [io 0xf000-0xf003]
pci 0000:00:1f.5: reg 20: [io 0xef00-0xef0f]
pci 0000:00:1f.5: reg 24: [io 0xee00-0xee0f]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: [10de:0640] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [197b:2361] type 0 class 0x000101
pci 0000:02:00.0: reg 24: [mem 0xfdafe000-0xfdafffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: [197b:2361] type 0 class 0x000101
pci 0000:02:00.1: reg 10: [io 0xbf00-0xbf07]
pci 0000:02:00.1: reg 14: [io 0xbe00-0xbe03]
pci 0000:02:00.1: reg 18: [io 0xbd00-0xbd07]
pci 0000:02:00.1: reg 1c: [io 0xbc00-0xbc03]
pci 0000:02:00.1: reg 20: [io 0xbb00-0xbb0f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:03:02.0: [1013:6003] type 0 class 0x000401
pci 0000:03:02.0: reg 10: [mem 0xfdeff000-0xfdefffff]
pci 0000:03:02.0: reg 14: [mem 0xfdd00000-0xfddfffff]
pci 0000:03:02.0: supports D1 D2
pci 0000:03:06.0: [10ec:8167] type 0 class 0x000200
pci 0000:03:06.0: reg 10: [io 0xce00-0xceff]
pci 0000:03:06.0: reg 14: [mem 0xfdefe000-0xfdefe0ff]
pci 0000:03:06.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:03:06.0: supports D1 D2
pci 0000:03:06.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:06.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x3ff00000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f000 - 000000000009ffff
reserve RAM buffer: 000000003fee0000 - 000000003fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0x3ff00000-0xfebfffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0010-0x001f]
pnp 00:01: [io 0x0022-0x003f]
pnp 00:01: [io 0x0044-0x005f]
pnp 00:01: [io 0x0062-0x0063]
pnp 00:01: [io 0x0065-0x006f]
pnp 00:01: [io 0x0074-0x007f]
pnp 00:01: [io 0x0091-0x0093]
pnp 00:01: [io 0x00a2-0x00bf]
pnp 00:01: [io 0x00e0-0x00ef]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0a00-0x0a7f]
pnp 00:01: [io 0x0880-0x088f]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0a00-0x0a7f] has been reserved
system 00:01: [io 0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0080-0x0090]
pnp 00:02: [io 0x0094-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [irq 0 disabled]
pnp 00:03: [irq 8]
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io 0x0070-0x0073]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io 0x03f0-0x03f5]
pnp 00:07: [io 0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io 0x0378-0x037f]
pnp 00:09: [io 0x0778-0x077b]
pnp 00:09: [irq 7]
pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:0a: [irq 12]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0b: [io 0x0060]
pnp 00:0b: [io 0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0c: [io 0x0400-0x04bf]
system 00:0c: [io 0x0400-0x04bf] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0xffb80000-0xffbfffff]
pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0e: [mem 0xe0000000-0xefffffff]
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x000f0000-0x000fffff]
pnp 00:0f: [mem 0xfed00000-0xfed000ff]
pnp 00:0f: [mem 0x3fee0000-0x3fefffff]
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x00100000-0x3fedffff]
pnp 00:0f: [mem 0xfec00000-0xfec00fff]
pnp 00:0f: [mem 0xfed14000-0xfed1dfff]
pnp 00:0f: [mem 0xfed20000-0xfed9ffff]
pnp 00:0f: [mem 0xfee00000-0xfee00fff]
pnp 00:0f: [mem 0xffb00000-0xffb7ffff]
pnp 00:0f: [mem 0xfff00000-0xffffffff]
pnp 00:0f: [mem 0x000e0000-0x000effff]
system 00:0f: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:0f: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:0f: [mem 0x3fee0000-0x3fefffff] could not be reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x00100000-0x3fedffff] could not be reserved
system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0f: [mem 0xfed14000-0xfed1dfff] has been reserved
system 00:0f: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0f: [mem 0x000e0000-0x000effff] has been reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.0: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:1c.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:03:06.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x3ff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0x3ff00000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 10624k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1318413571.441:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1744
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler bfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
intel_idle: MWAIT substates: 0x220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Adaptec aacraid driver 1.1-7[28000]-ms
Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
cpuidle: using governor ladder
cpuidle: using governor menu
TCP vegas registered
TCP yeah registered
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 548k freed
BFS CPU scheduler v0.406 by Con Kolivas.
udev[534]: starting version 164
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
FDC 0 is a post-1991 82077
ACPI: Fan [FAN] (on)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (29 C)
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-liquorix-20111012 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-liquorix-20111012 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
uhci_hcd: USB Universal Host Controller Interface driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
r8169 0000:03:06.0: (unregistered net_device): no PCI Express capability
r8169 0000:03:06.0: eth0: RTL8169sc/8110sc at 0xf83ba000, 00:16:17:b3:34:3b, XID 18000000 IRQ 21
pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:02:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
ahci 0000:02:00.0: version 3.0
ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: JMB361 has only one port
ahci 0000:02:00.0: forcing port_map 0x3 -> 0x1
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:02:00.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 16
ata4: DUMMY
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
ata6: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi6 : ata_piix
scsi7 : ata_piix
ata7: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xef00 irq 19
ata8: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xef08 irq 19
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.39-liquorix-20111012 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.39-liquorix-20111012 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.39-liquorix-20111012 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.39-liquorix-20111012 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.39-liquorix-20111012 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
ata3: SATA link down (SStatus 0 SControl 300)
Refined TSC clocksource calibration: 2004.545 MHz.
Switching to clocksource tsc
ata7: SATA link down (SStatus 0 SControl 300)
usb 7-1: new full speed USB device number 2 using uhci_hcd
ata8: SATA link down (SStatus 0 SControl 300)
usb 7-1: New USB device found, idVendor=0451, idProduct=2046
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
ata6.00: SATA link down (SStatus 0 SControl 300)
ata6.01: SATA link down (SStatus 4 SControl 300)
usb 7-1.4: new full speed USB device number 3 using uhci_hcd
ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.01: SATA link down (SStatus 4 SControl 300)
ata5.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
ata5.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 4:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb 7-1.4: New USB device found, idVendor=0a12, idProduct=0001
usb 7-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sda: sda1 sda2 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda5): mounted filesystem with writeback data mode
udev[774]: starting version 164
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
psmouse serio1: ID: 10 00 64
ACPI: acpi_idle registered with cpuidle
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: PC Speaker as /devices/platform/pcspkr/input/input3
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Linux agpgart interface v0.103
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Sound Fusion CS46xx 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Sound Fusion CS46xx 0000:03:02.0: setting latency timer to 64
gameport gameport0: CS46xx Gameport is pci0000:03:02.0/gameport0, speed 596kHz
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 285.05.09 Fri Sep 23 18:53:08 PDT 2011
Adding 7909372k swap on /dev/sda1. Priority:-1 extents:1 across:7909372k
EXT3-fs (sda5): using internal journal
loop: module loaded
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda6): using internal journal
EXT3-fs (sda6): mounted filesystem with writeback data mode
fuse init (API version 7.16)
r8169 0000:03:06.0: eth0: link down
NET: Registered protocol family 17
r8169 0000:03:06.0: eth0: link up
NET: Registered protocol family 10
eth0: no IPv6 routers present
nvidia 0000:01:00.0: PCI INT A disabled
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 285.05.09 Fri Sep 23 18:53:08 PDT 2011
[drm] Initialized drm 1.1.0 20060810
mtrr: base(0xf9000000) is not aligned on a size(0xe00000) boundary
nvidia 0000:01:00.0: PCI INT A disabled
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 285.05.09 Fri Sep 23 18:53:08 PDT 2011